types of armored cable
types of armored cable

1. Irradiation crosslinked power cables (voltage level: 0.6/1KV;)
 
Irradiation cross-linked cable is using high energy X-ray bombardment poly hydrogen atoms in the molecular chain discharge, and molecular chain gaps, combined with the adjacent molecular chains together to form -C-C- crosslinks, forming a network of molecular stereo structure and form crosslinked polyethylene.
 
The irradiated crosslinked polyethylene heat performance can reach 105 degrees, irradiation crosslinking is physical crosslink, involvement of the crosslinking without water, content of water molecules in the insulation is less than 100ppm, insulation is high purity, thus radiation cross-linking cable in the electrical properties, mechanical properties have unique excellent properties, cable life can up to 60 years. At the same time, the cable has the characteristics of light weight, simple structure, laying gap restrictions etc.
 
YJV, YJLV irradiated crosslinked polyethylene insulated and PVC sheathed power cable
 
YJY, YJLY irradiated crosslinked polyethylene insulated and PE sheathed power cable
 
 
YJV23, YJLV23 irradiated XLPE insulated steel tape armoured PVC sheathed power cable
 
YJV32 YJLV32, irradiated XLPE insulated steel wire armoured PVC sheathed power cable
 
YJV33 YJLV33, irradiated XLPE insulated steel wire armoured and PE sheathed power cable
 
Basic structure: conductor - XLPE insulated - inner sheath - steel tape armored - PVC sheath
 
Irradiated cross linked polyolefin (main material is polyethylene) wire and cable is mainly used in heat resistant construction line, automobile line, aviation conductor, locomotive wire and electrical wiring, etc.
 
 
2, medium voltage cross linked polyethylene insulated power cables (voltage level: 6/6KV-26/35KV;)
 
Medium voltage cross-linked polyethylene cables use full dry chemical crosslinking methods using polyethylene molecules by the linear molecular structure variable space reticulated structure, so that the hot plastic polyethylene translated for thermosetting cross-linked polyethylene, the mechanical properties, heat aging properties and environmental stress on the very big degree is improved, and has excellent electrical performance. With the normal operating temperature, high temperature, simple structure, small outside diameter, light weight, easy to use, not limited by the laying gap. Suitable for power frequency rated voltage 1-35KV power distribution system.
 
YJV62, YJLV62 XLPE insulated double non-magnetic metal tape armoured PVC sheathed power cable
 
YJV63, YJLV63 XLPE insulated double non-magnetic metal tape armored PE sheathed power cable
 
 
3, high voltage cross linked polyethylene insulated power cables (voltage level: 64/110KV, 127/220KV, 290/500KV)
 
XLPE cable has excellent gas performance, dielectric loss ratio than paper insulation and PVC insulation is small, XLPE cable capacitance is small, in the absence of effective star grounding system can also reduce the charging current and grounding fault current. Easy installation is one of the major advantages of the XLPE cable, compared with other power cable, XLPE cable bending radius is small, light weight, simple processing terminal, as the XLPE cables are not oily, so in the laying don't have more consideration for line, there is no more laying due to drip oil.
 
YJLV YJV cross linked polyethylene insulated and PVC sheathed power cable
 
YJY, YJLY cross linked polyethylene insulated and PE sheathed power cable
 
YJLW02, YJLLW02 cross linked polyethylene insulated corrugated aluminum sheath PVC sheathed power cable
 
YJLW03, YJLLW03 cross linked polyethylene insulated corrugated aluminum sheath PE sheath power cable
          
4. control cable (executive standard: GB9330-88; voltage level: 450/750V)
Products adopt irradiation crosslinking polyethylene or polyvinyl chloride as the insulating layer, with excellent electrical properties, mechanical properties and chemical stability, suitable for rated voltage 0.6/1kv and below control and monitoring circuit is used for situations with protective circuit protection. The conductor of the cable is allowed to work at a temperature of 70 degrees Celsius for a long time, and the conductor of the irradiated cross-linked polyethylene cable is allowed to work at 90 degrees for a long time; the temperature of the cable is not less than 0 degrees;
 
Recommended permissible bending radius: non armoured cable should be no less than 6 times of cable shape, with armor or shield.
 
KVV, KYJV polyvinyl chloride insulated (radiation crosslinked polyethylene insulated) PVC sheathed control cable
KVVP, KYJVP polyvinyl chloride insulated (radiation crosslinked polyethylene insulated) PVC sheathed braided shield control cable
KVVP22, KYJVP22 polyvinyl chloride insulated XLPE insulated PVC sheathed copper shielded control cable
KVV22, KYJV22 XLPE insulated PVC insulated PVC sheathed control cable
KVV32, KYJV32 PVC insulated (XLPE insulated) PVC sheath cable
KVVR, KYJVR polyvinyl chloride insulated (radiation crosslinked polyethylene insulated) PVC sheathed control cable
KVVRP, KYJVRP polyvinyl chloride insulated (radiation crosslinked polyethylene insulated) PVC sheathed braided shielding control flexible cable
 

Contact Form Please fill all the texts in the fields.

Newslist
About Us Products News Download Contact Us

Copyright © 2018 Henan Jiapu Cable Group All Rights Reserved Power by DedeCms