IEC 60502 IEC 60502 50 mm armour cable
 
50 mm armoured cable50 mm armoured cable introduction:
-Conductor: Copper or aluminium conductor 
-Insulation: Cross-linked polyethylene( XLPE or PVC) 
-Color Identication: Brown, Grey, Black, Blue, Green/Yellow or others on request
-Filler: Polypropylene lament with lapped binding tape 
-Inner Sheath: Polyvinyl chloride (Black) 
-Armor: SWA steel wire armore (Remark: for single core the armore should be AWA)  
-Core-covering: binding tape 
-Outer Sheath: PVC or PE sheath 
-Core: 1C, 2C, 3C,4C,5C, 3C+1E,4C+1E,3C+2E
-Voltage rating: 3.6/6KV, 6/6KV, 6/10KV, 8.7/10KV, 8.7/15KV, 12/20KV, 18/20KV, 18/30KV, 21/35KV, 26/35KV
-Standard applied: IEC60502, BS6346, GB/T12706
-Remark:  The cable can be of flame retardance, fire resistance and environment friendly or other property.
 
50mm Armoured Cable is one specific size of armoured cable, primarily used in  large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly used in more industrial installations such as power stations and large construction sites.
 
Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees. 
 

Contact Form Please fill all the texts in the fields.

Newslist
About Us Products News Download Contact Us

Copyright © 2018 Henan Jiapu Cable Group All Rights Reserved Power by DedeCms