How to do mc cable installation?
MC cable is required to be installed in some locations for home electrical wiring and is often used when wiring outlets and lighting circuits. The installation of MC Cable must be according to applicable codes including the following guidelines.
MC cable installation steps:
Skill Level: Intermediate to Advanced
Tools Required: Electricians Pouch of Hand Tools for Rough-In Wiring, Electric Drill and Auger Bits and Extension Cord.
Estimated Time: Depends on the extent of the project, the type of construction and available access to the project area..
Precaution: Any existing wiring in the immediate area that may interfere with the installation should be identified and turned OFF and Tagged.
Notice: Installing additional electrical wiring should be done with a permit and be inspected.
MC cable needs to be supported as follows:
1.The same as when running Romex wiring.
2.Secured or supported every 4 feet 6 inches.
3.Secured with 8 inches of the box.
4.Insert insulated bushing sleeves at each end of the cable.

Contact Form Please fill all the texts in the fields.

About Us Products News Download Contact Us

Copyright © 2018 Henan Jiapu Cable Group All Rights Reserved Power by DedeCms